Casio Watch 2161 User Manual

2161/2251/2261-1  
Module No. 2161/2251/2261  
GENERAL GUIDE  
Press C to change from mode to mode. Each mode is explained in detail on the following pages.  
After you perform an operation in any mode, pressing C returns to the Timekeeping Mode.  
Press D in any mode to illuminate the display.  
The operational procedures for Modules 2251, 2261 and 2161 are identical. All of the illustrations in this manual show Module 2161.  
Timekeeping Mode  
Alarm Mode  
Countdown Alarm Mode  
Stopwatch Mode  
[Modules 2251, 2261]  
[Module 2161]  
ALARM MODE  
TIMEKEEPING MODE  
To set the time and date  
1. Press A while in the Timekeeping Mode. The seconds  
digits flash on the display because they are selected.  
2. Press C to change the selection in the following se-  
quence.  
You can set an alarm with hour, minutes, month, and day.  
When the alarm is on, the alarm sounds for 20 seconds at  
the preset time. When the Hourly Time Signal is on, the  
watch beeps every hour on the hour.  
Alarm on indicator  
Month - Day  
Day of week  
Hourly time  
Mode  
indicator  
signal on  
indicator  
Alarm Types  
Seconds  
Day  
Hour  
Minutes  
Year  
The types of alarm you get depends on the information  
you set.  
Month  
To set a daily alarm  
Set the hour and minutes for the alarm time. Set “” for  
the month and “– –” for the day (see step 3 under “To  
set the alarm time”). This type of setting causes the alarm  
to sound every day at the time you set.  
Hour  
Minutes  
PM indicator  
Seconds  
Hour Minutes  
Month - Day  
To set a date alarm  
Set the month, day, hour and minutes for the alarm time.  
This type of setting causes the alarm to sound at the  
specific time, on the specific date you set.  
3. While the seconds digits are selected (flashing), press B to reset the seconds to  
“00”. If you press B while the seconds count is in the range of 30 to 59, the sec-  
onds are reset to “00” and 1 is added to the minutes. If the seconds count is in the  
range of 00 to 29, the minutes count is unchanged.  
4. While any other digits (besides seconds) are selected (flashing), press B to in-  
crease the number. Holding down B changes the number at high speed.  
To switch between the 12-hour and 24-hour formats, press D while some dig-  
its are flashing.  
5. After you set the time and date, press A to return to the Timekeeping Mode.  
The day of the week is automatically set in accordance with the date.  
The date can be set within the range of January 1, 1995 to December 31, 2039.  
If you do not operate any button for a few minutes while a selection is flashing, the  
flashing stops and the watch goes back to the Timekeeping Mode automatically.  
To set a 1-month alarm  
Set the month, hour and minutes for the alarm time. Set “– –” for the day (see step  
3 under “To set the alarm time”). This type of setting causes the alarm to sound  
every day at the time you set, only during the month you set.  
To set a monthly alarm  
Set the day, hour and minutes for the alarm time. Set “” for the month (see step 3  
under “To set the alarm time”). This type of setting causes the alarm to sound  
every month at the time you set, on the day you set.  
To set the alarm time  
1. Press A while in the Alarm Mode until the hour digits start to flash on the display.  
The hour digits flash because they are selected.  
At this time the alarm is automatically switched on.  
About the backlight  
2. Press C to change the selection in the following sequence.  
When you switch the backlight function on, the backlight of the watch flashes when-  
ever alarm, countdown alarm or hourly time signal is sounding.  
Pressing D at any time illuminates the display for about two seconds, regardless of  
the backlight’s on/off setting.  
The backlight of this watch employs an electro-luminescent (EL) light, which loses  
its illuminating power after very long term use.  
Hour  
Day  
Minutes  
Month  
3. Press B to increase the selected digits. Holding down B changes the number at  
high speed.  
Frequent use of the backlight shortens the battery life.  
The format (12-hour and 24-hour) of the alarm time matches the format you select  
To switch the backlight function on and off  
for normal timekeeping.  
In the Timekeeping Mode, hold down B for one or two seconds to switch the back-  
light function on and off. When you switch the backlight function on, an indicator  
appears on the display as shown.  
When setting the alarm time using the 12-hour format, take care to set the time  
correctly as morning or afternoon.  
4. After you set the alarm time, press A to return to the Alarm Mode.  
If you do not operate any button for a few minutes while a selection is flashing, the  
flashing stops and the watch goes back to the Alarm Mode automatically.  
Alarm on indicator  
To stop the alarm  
Press any button to stop the alarm after it starts to sound.  
Hourly time signal  
on indicator  
Backlight function  
on indicator  
To switch an alarm and Hourly Time Signal on and off  
Press B while in the Alarm Mode to change the status of an alarm (see “Alarm Types”)  
and Hourly Time Signal in the following sequence.  
The backlight function indicator remains on the display in all modes until you switch  
the backlight function off.  
The above operation controls operation of the backlight function only. It does not  
affect operation of audible tones and signals.  
Both off  
Alarm only  
Hourly Time Signal only  
Both on  
The watch will emit an audible sound whenever the display is illuminated. This is  
caused by a transistor that vibrates when the EL panel lights up. It does not indicate  
malfunction of the watch.  
 

Black Box Switch Black Box ServSwitch Wizard VGA USB User Manual
Black Box Switch KV2116E User Manual
Blodgett Oven B48A CCCC User Manual
Boston Acoustics Car Speaker boston mobile audio performance standard coaxial speakers User Manual
Boston Acoustics Speaker HSi 460 User Manual
Bush Hog Brush Cutter Sq142 User Manual
Cadco Range BRC D1 User Manual
Canon Printer BU 20 User Manual
Casio GPS Receiver E 200 User Manual
Christie Digital Systems Projector 38 VIV302 01 User Manual