fx-100MS
fx-115MS
(fx-912MS)
User’s Guide 2
(Additional Functions)
kfx-912MS owners
Please be sure to read the important notice of this manual.
nload from Www.Somanuals.com. All Manuals Search And Down
E
Contents
Before getting started............................. 2
kModes .................................................................... 2
Mathematical Expression Calculations
and Editing Functions ............................ 3
kReplay Copy ........................................................... 3
kCALC Memory ....................................................... 4
kSOLVE Function .................................................... 4
Scientific Function Calculations............ 5
kInputting Engineering Symbols .............................. 5
Complex Number Calculations .............. 7
kAbsolute Value and Argument Calculation............. 8
kRectangular Form ↔ Polar Form Display .............. 8
kConjugate of a Complex Number .......................... 9
Base-n Calculations ................................ 9
Statistical Calculations......................... 11
Normal Distribution .................................................. 11
Differential Calculations ....................... 12
Integration Calculations ....................... 13
Power Supply......................................... 14
Specifications........................................ 16
See the “fx-95MS/fx-100MS/fx-115MS/fx-570MS/fx-
991MS User’s Guide” for details about the following items.
Removing and Replacing the Calculator’s Cover/
Safety Precautions/ Handling Precautions/
Two-line Display/
Before getting started... (except for “Modes”)/
Basic Calculations/ Memory Calculations/
Scientific Function Calculations/ Equation Calculations/
Statistical Calculations/ Technical Information
E-1
nload from Www.Somanuals.com. All Manuals Search And Down
Before getting started...
k Modes
Before starting a calculation, you must first enter the correct
mode as indicated in the table below.
• The following table shows the modes and required
operations for the fx-100MS and fx-115MS.
fx-100MS and fx-115MS Modes
To perform this type of
Perform this
To enter
calculation:
key operation:
this mode:
Basic arithmetic
calculations
Complex number
calculations
F 1
F 2
COMP
CMPLX
Standard deviation
SD
F F 1
F F 2
F F 3
F F F 1
Regression calculations
Base-n calculations
Solution of equations
REG
BASE
EQN
• Pressing the
key more than three times displays
F
additional setup screens. Setup screens are described
where they are actually used to change the calculator
setup.
• In this manual, the name of the mode you need to enter
in order to perform the calculations being described is
indicated in the main title of each section.
Example:
Complex Number
Calculations
CMPLX
Note!
• To return the calculation mode and setup to the initial
defaults shown below, press A B 2(Mode) =.
Calculation Mode:
Angle Unit:
COMP
Deg
Exponential Display Format:
Norm 1, Eng OFF
Complex Number Display Format: a+bi
Fraction Display Format:
Decimal Point Character:
ab/c
Dot
E-2
nload from Www.Somanuals.com. All Manuals Search And Down
• Mode indicators appear in the upper part of the display,
except for the BASE indicators, which appear in the
exponent part of the display.
• Engineering symbols are automatically turned off while
the calculator is the BASE Mode.
• You cannot make changes to the angle unit or other
display format (Disp) settings while the calculator is in
the BASE Mode.
• The COMP, CMPLX, SD, and REG modes can be used
in combination with the angle unit settings.
• Be sure to check the current calculation mode (SD, REG,
COMP, CMPLX) and angle unit setting (Deg, Rad, Gra)
before beginning a calculation.
Mathematical Expression
COMP
Calculations and Editing
Functions
Use the F key to enter the COMP Mode when you
want to perform mathematical expression calculations
or edit expressions.
COMP ............................................................ F 1
k Replay Copy
Replay copy lets you recall multiple expressions from replay
so they are connected as a multi-statement on the screen.
• Example:
Replay memory contents:
1 + 1
2 + 2
3 + 3
4 + 4
5 + 5
6 + 6
Multi-statement: 4 + 4:5 + 5:6 + 6
Use [ and ] to display the expression 4 + 4.
Press A [(COPY).
E-3
nload from Www.Somanuals.com. All Manuals Search And Down
• You can also edit expressions on the display and per-
form other multi-statement operations. For more details
about using multi-statements, see “Multi-statements” in
the separate “User’s Guide.”
• Only the expressions in replay memory starting from the
currently displayed expression and continuing to the last
expression are copied. Anything before the displayed
expression is not copied.
CMPLX
COMP
k CALC Memory
• CALC memory lets you temporarily store a mathematical
expression that you need to perform a number of times
using different values. Once you store an expression,
you can recall it, input values for its variables, and
calculate a result quickly and easily.
• You can store a single mathematical expression, with up
to 79 steps. Note that CALC memory can be used in the
COMP Mode and CMPLX Mode only.
• The variable input screen shows the values currently
assigned to the variables.
• Example: Calculate the result for Y = X2 + 3X – 12
when X = 7 (Result: 58), and when X = 8 (Result: 76).
(Input the function.)
p y p u p x K + 3 p x , 12
(Store the expression.)
(Input 7 for X? prompt.)
(Input 8 for X? prompt.)
C
7 =
C 8 =
• Note that the expression you store is cleared whenever
you start another operation, change to another mode, or
turn off the calculator.
k SOLVE Function
The SOLVE function lets you solve an expression using
variable values you want, without the need to transform or
simply the expression.
• Example: C is the time it would take for an object thrown
straight up with initial velocity A to reach height B.
E-4
nload from Www.Somanuals.com. All Manuals Search And Down
Use the formula below to calculate initial velocity A for a
height of B = 14 meters and a time of C = 2 seconds.
Gravitational acceleration is D = 9.8 m/s2.
(Result: A = 16.8)
1
2
B ꢀ AC –
DC2
p 2 p u p 1 - p k ,
R 1 \ 2 T - p h - p k K
A I
14 =
]
(B?)
(A?)
(C?)
(D?)
2 =
9 l 8 =
[ [
A I
(A?)
• The SOLVE function finds approximations based on
Newton’s method, which means that error can occur.
Certain expressions or initial values may result in error
without convergence of results.
• If an expression does not include an equals sign (=), the
SOLVE function produces a solution for expression = 0.
Scientific Function
Calculations
COMP
Use the F key to enter the COMP Mode when you
want to perform basic arithmetic calculations.
COMP ............................................................ F 1
k Inputting Engineering Symbols
COMP
EQN
CMPLX
• Turning on engineering symbols makes it possible for
you to use engineering symbols inside your calculations.
E-5
nload from Www.Somanuals.com. All Manuals Search And Down
• To turn engineering symbols on and off, press the F
key a number of times until you reach the setup screen
shown below.
Disp
1
• Press 1. On the engineering symbol setting screen that
appears, press the number key (1 or 2) that corre-
sponds to the setting you want to use.
1(Eng ON): Engineering symbols on (indicated by
“Eng” on the display)
2(Eng OFF): Engineering symbols off (no “Eng”
indicator)
• The following are the nine symbols that can be used
when engineering symbols are turned on.
To input this symbol: Perform this key operation:
Unit
k (kilo)
M (Mega)
G (Giga)
T (Tera)
m (milli)
µ (micro)
n (nano)
p (pico)
A k
A M
A g
A t
A m
A N
A n
A p
A f
103
106
109
1012
10–3
10–6
10–9
10–12
10–15
f (femto)
• For displayed values, the calculator selects the engineer-
ing symbol that makes the numeric part of the value fall
within the range of 1 to 1000.
• Engineering symbols cannot be used when inputting frac-
tions.
• Example: 9 Ö10 = 0.9 m (milli)
Eng
.....
(Disp)
1
F
1
0.
9Ϭ1
m
900.
9 \ 10 =
When engineering symbols are turned on, even standard (non-engineering)
calculation results are displayed using engineering symbols.
E-6
nload from Www.Somanuals.com. All Manuals Search And Down
A P
0.9
9Ϭ1
m
900.
J
Complex Number
Calculations
CMPLX
Use the F key to enter the CMPLX Mode when you
want to perform calculations that include complex
numbers.
CMPLX ........................................................... F 2
• The current angle unit setting (Deg, Rad, Gra) affects
CMPLX Mode calculations. You can store an expres-
sion in CALC memory while in the CMPLX Mode.
• Note that you can use variables A, B, C, and M only in
the CMPLX Mode. Variables D, E, F, X, and Y are used
by the calculator, which frequently changes their values.
You should not use these variables in your expressions.
• The indicator “R↔I” in the upper right corner of a
calculation result display indicates a complex number
result. Press A r to toggle the display between the
real part and imaginary part of the result.
• You can use the replay function in the CMPLX Mode.
Since complex numbers are stored in replay memory in
the CMPLX Mode, however, more memory than normal
is used up.
• Example: (2ѿ3i)ѿ(4ѿ5i) ꢀ 6ѿ8i
(Real part 6)
2 + 3 i + 4 + 5 i =
A r
(Imaginary part 8i)
E-7
nload from Www.Somanuals.com. All Manuals Search And Down
k Absolute Value and Argument
Calculation
Supposing the imaginary number expressed by the
rectangular form z = a + bi is represented as a point in the
Gaussian plane, you can determine the absolute value (r)
and argument () of the complex number. The polar form
is rЄ.
• Example 1: To determine the absolute value (r) and
argument () of 3+4i (Angle unit: Deg)
(r = 5, = 53.13010235°)
Imaginary axis
Real axis
(r ꢀ 5)
A A R 3 + 4 i T =
A a R 3 + 4 i T =
( ꢀ 53.13010235°)
• The complex number can also be input using the polar
form rЄ.
• Example 2: 2 Є 45 ꢀ 1 ѿ i
(Angle unit: Deg)
L 2 A Q 45 =
A r
k Rectangular Form ↔ Polar Form
Display
You can use the operation described below to convert a
rectangular form complex number to its polar form, and a
polar form complex number to its rectangular form. Press
A r to toggle the display between the absolute value
(r) and argument ().
• Example: 1 ѿ i ↔ 1.414213562 Є 45
(Angle unit: Deg) 1 + i A Y = A r
L 2 A Q 45 A Z = A r
E-8
nload from Www.Somanuals.com. All Manuals Search And Down
• You select rectangular form (a+bi) or polar form (rЄ)
for display of complex number calculation results.
...
F
1(Disp) r
1(a+bi):Rectangular form
2(rЄ): Polar form (indicated by “rЄ” on the display)
k Conjugate of a Complex Number
For any complex number z where z = a+bi, its conjugate
(z) is z = a–bi.
• Example: To determine the conjugate of the complex
number 1.23 + 2.34i (Result: 1.23 – 2.34i)
A S R 1 l 23 + 2 l 34 i T =
A r
BASE
Base-n Calculations
Use the F key to enter the BASE Mode when you
want to perform calculations using Base-n values.
BASE ........................................................F F 3
• In addition to decimal values, calculations can be
performed using binary, octal and hexadecimal values.
• You can specify the default number system to be applied
to all input and displayed values, and the number system
for individual values as you input them.
• You cannot use scientific functions in binary, octal,
decimal, and hexadecimal calculations.You cannot input
values that include decimal part and an exponent.
• If you input a value that includes a decimal part, the unit
automatically cuts off the decimal part.
• Negative binary, octal, and hexadecimal values are
produced by taking the two’s complement.
E-9
nload from Www.Somanuals.com. All Manuals Search And Down
• You can use the following logical operators between
values in Base-n calculations: and (logical product), or
(logical sum), xor (exclusive or), xnor (exclusive nor),
Not (bitwise complement), and Neg (negation).
• The following are the allowable ranges for each of the
available number systems.
Binary
1000000000 Ϲ x Ϲ 1111111111
0 Ϲ x Ϲ 0111111111
Octal
4000000000 Ϲ x Ϲ 7777777777
0 Ϲ x Ϲ 3777777777
Decimal
–2147483648 Ϲ x Ϲ 2147483647
Hexadecimal
80000000 Ϲ x Ϲ
0 Ϲ x Ϲ
FFFFFFFF
7FFFFFFF
• Example 1: To perform the following calculation and
produce a binary result:
101112 ѿ 110102 ꢀ1100012
b
Binary mode:
t b
0.
10111 + 11010 =
• Example 2: To perform the following calculation and
produce an octal result:
76548 ÷ 1210 ꢀ 5168
Octal mode:
o
t o
0.
l l l 4(o) 7654 \
l l l 1(d) 12 =
• Example 3: To perform the following calculation and
produce a hexadecimal and a decimal result:
12016 or 11012 ꢀ 12d16 ꢀ 30110
H
Hexadecimal mode:
t h
0.
120 l 2(or)
( )
b
l l l 3 1101 =
Decimal mode:
K
E-10
nload from Www.Somanuals.com. All Manuals Search And Down
• Example 4: To convert the value 2210 to its binary, oc-
tal, and hexadecimal equivalents.
(101102 , 268 , 1616
)
b
0.
10110.
26.
Binary mode:
t b
b
o
l l l 1(d) 22 =
Octal mode:
Hexadecimal mode:
o
h
H
16.
• Example 5: To convert the value 51310 to its binary
equivalent.
b
0.
Binary mode:
t b
Ma t h ERROR
l l l 1(d) 513 =
b
• You may not be able to convert a value from a number
system whose calculation range is greater than the cal-
culation range of the resulting number system.
• The message “Math ERROR” indicates that the result
has too many digits (overflow).
SD
Statistical
Calculations
REG
SD
Normal Distribution
Use the F key to enter the SD Mode when you want
to perform a calculation involving normal distribution.
SD ........................................................... F F 1
• Press A D, which produces the screen shown below.
(
(
(
P Q R
→t
1 2 3 4
E-11
nload from Www.Somanuals.com. All Manuals Search And Down
• Input a value from 1 to 4 to select the probability
distribution calculation you want to perform.
P(t)
Q(t)
R(t)
• Example: To determine the normalized variate (→t) for
x = 53 and normal probability distribution P(t) for the
following data: 55, 54, 51, 55, 53, 53, 54, 52
(→
t = Ҁ0.284747398, P(t) = 0.38974 )
55 S 54 S 51 S 55 S
53 S S 54 S 52 S
53 A D 4( t) =
→
A D 1(P() D 0.28 F =
Differential
Calculations
COMP
The procedure described below obtains the derivative of
a function.
Use the F key to enter the COMP Mode when you
want to perform a calculation involving differentials.
COMP ............................................................ F 1
• Three inputs are required for the differential expression:
the function of variable x, the point (a) at which the dif-
ferential coefficient is calculated, and the change in
x (∆x).
A J expression P a P ∆x T
• Example: To determine the derivative at point x = 2 for
the function y = 3x2– 5x + 2, when the increase or de-
crease in x is ∆x = 2 × 10–4 (Result: 7 )
A J 3 p x K , 5 p x + 2 P 2 P
2 e D 4 T =
E-12
nload from Www.Somanuals.com. All Manuals Search And Down
• You can omit input of ∆x, if you want. The calculator
automatically substitutes an appropriate value for ∆x if
you do not input one.
• Discontinuous points and extreme changes in the value
of x can cause inaccurate results and errors.
Integration
Calculations
COMP
The procedure described below obtains the definite integral
of a function.
Use the F key to enter the COMP Mode when you
want to perform integration calculations.
COMP ............................................................ F 1
• The following four inputs are required for integration
calculations: a function with the variable x; a and b, which
define the integration range of the definite integral; and
n, which is the number of partitions (equivalent to N =
2n) for integration using Simpson’s rule.
d expression P a P b P n F
5
• Example: ∫ (2x2 + 3x + 8) dx = 150.6666667
1
(Number of partitions n = 6)
2
3
p x K + p x +
d
8 P 1 P 5 P 6 T =
Note!
• You can specify an integer in the range of 1 to 9 as the
number of partitions, or you can skip input of the number
of partitions entirely, if you want.
• Internal integration calculations may take considerable
time to complete.
• Display contents are cleared while an integration
calculation is being performed internally.
E-13
nload from Www.Somanuals.com. All Manuals Search And Down
Power Supply
The type of battery you should use depends on the model
number of your calculator.
fx-115MS
The TWO WAY POWER system actually has two power
supplies:a solar cell and a G13Type (LR44) button battery.
Normally, calculators equipped with a solar cell alone can
operate only when relatively bright light is present. The
TWO WAY POWER system, however, lets you continue
to use the calculator as long as there is enough light to
read the display.
• Replacing the Battery
Either of the following symptoms indicates battery power
is low, and that the battery should be replaced.
• Display figures are dim and difficult to read in areas
where there is little light available.
• Nothing appears on the display when you press the
5 key.
u To replace the battery
1 Remove the five screws that
hold the back cover in place
and then remove the back
cover.
Screw
Screw
2 Remove the old battery.
3 Wipe off the sides of new
battery with a dry, soft cloth.
Load it into the unit with the
positive
side facing up (so
k
you can see it).
4 Replace the back cover and
secure it in place with the five
screws.
5 Press 5 to turn power on. Be sure not to skip this
step.
E-14
nload from Www.Somanuals.com. All Manuals Search And Down
fx-100MS
This calculator is powered by a single AA-size battery.
• Replacing the Battery
Dim figures on the display of the calculator indicate that
battery power is low.Continued use of the calculator when
the battery is low can result in improper operation.
Replace the battery as soon as possible when display
figures become dim.
• To replace the battery
1 Press Aito turn power off.
Screw
Screw
2 Remove the six screws that
hold the back cover in place
and then remove the back
cover.
3 Remove the old battery.
4 Load a new battery into the
unit with its positive
and
k
negative
correctly.
ends facing
l
5 Replace the back cover and
secure it in place with the six
screws.
6 Press 5 to turn power on.
Auto Power Off
Calculator power automatically turns off if you do not
perform any operation for about six minutes. When this
happens, press 5 to turn power back on.
E-15
nload from Www.Somanuals.com. All Manuals Search And Down
Specifications
Power Supply:
fx-100MS: Single AA-size battery (R6P(SUM-3))
fx-115MS: Solar cell and a single G13 Type button
battery (LR44)
Battery Life:
fx-100MS: Approximately 17,000 hours continuous
display of flashing cursor.
Approximately 2 years when left with power
turned off.
fx-115MS: Approximately 3 years (1 hour use per day).
Dimensions:
fx-100MS: 20.0 (H) ҂ 78 (W) ҂ 155 (D) mm
13/16ꢀ (H) ҂ 31/16ꢀ (W) ҂ 61/8ꢀ (D)
fx-115MS: 12.7 (H) ҂ 78 (W) ҂ 154.5 (D) mm
1/2ꢀ (H) ҂ 31/16ꢀ (W) ҂ 61/16ꢀ (D)
Weight:
fx-100MS: 133 g (4.7 oz) including battery
fx-115MS: 105 g (3.7 oz) including battery
Power Consumption: 0.0002 W
OperatingTemperature: 0°C to 40°C (32°F to 104°F)
Important notice for fx-912MS owners
The names fx-912MS (Japan domestic model name)
and fx-115MS (international model name) apply to the
same model. Owners of the fx-912MS should refer to
the description of fx-115MS.
E-16
nload from Www.Somanuals.com. All Manuals Search And Down
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
SA0206-D Printed in China
nload from Www.Somanuals.com. All Manuals Search And Down
CA 310074C-1
|
Black Decker Trimmer 477435 02 PDF1 User Manual
Brookstone Crib Toy 841256 User Manual
Cadet Electric Heater EBHN1000 User Manual
Calphalon Coffeemaker HE100CMT User Manual
Canon Wireless Office Headset WFT E6 User Manual
Carrier Furnace 58EFA User Manual
Casio Cash Register PCR T285 User Manual
Chauvet Insect Control Equipment Hurricane 1100 User Manual
Chicago Electric Saw 97580 User Manual
Cisco Systems IP Phone 7900 Series User Manual