Bravetti Blender BB301 User Manual

OWNER’S MANUAL  
Model BB301  
120V~, 60Hz., 550 Watts  
Electronic Blender  
EURO-PRO Operating LLC  
Boston, MA, 02465  
1 (800) 798-7398  
Printed in China  
 
COPYRIGHT © EURO-PRO OPERATING LLC 2008  
ASSEMBLING YOUR BLENDER  
BLENDER PARTS AND CARE  
BLENDER PARTS AND CARE  
CAUTION: Follow these important steps to assemble, tighten, and  
mount blender container quickly and correctly. INJURY MAY  
RESULT IF MOVING BLADES ARE EXPOSED.  
COVER  
The cover for your blender consists of two parts, the plastic feeder  
cap and the vinyl cover. The cover is self-sealing, and is made of  
vinyl which is resistant to absorption of odors and stains. The  
feeder cap is removable for use as a measuring cup and provides an  
opening for the addition of other ingredients.  
1. Turn container up-side down so the small opening is at the top.  
2. Make sure that the sealed ring on container opening is tight.  
HOW YOUR BRAVETTI BLENDER WORKS  
Your blender is a multi-speed appliance which operates on a wide  
range of speeds from very slow to very fast. This range of speeds  
makes food preparation easy, interesting and also saves time because  
your blender processes foods in seconds.  
ALWAYS HOLD CONTAINER WITH ONE HAND WHILE  
PROCESSING!  
CONTAINER  
The container for the blender is graduated for easy measurement  
and is made of glass. The convenient handle and pouring lip permit  
easy removal of liquid mixtures while thicker mixtures are more  
easily removed through the bottom opening. The glass jar is  
marked with indicators for convenient measuring.  
LOW SPEED MODES includes PUREE, WHIP and MIX functions.  
HIGH SPEED MODES include GRATE, BLEND and LIQUEFY  
functions. By touching the control buttons, you can get the speed  
mode you need.  
PROCESSING ASSEMBLY  
The processing assembly consists of three parts: a sealing ring used  
as a cushion between the container and the agitator; agitator of  
high-grade stainless steel; a threaded container bottom.  
Another choice is PULSE to crush ice.  
MOTOR AND MOTOR BASE  
The powerful multi-speed motor is the heart of the appliance and is  
designed just for this unit. It is completely enclosed within the  
housing.  
1. Follow assembly steps as described above.  
2. Fill container with 2 cups of ice cubes.  
3. Place lid assembly on container.  
4. Spin the knob to the ICE CRUSH/PULSE position.  
5. Ice can be crushed by continuously spinning the knob until  
desired consistency is reached.  
6. Let go of the knob and let it revert to the OFF position  
automatically. Unplug appliance.  
7. Remove container from blender base.  
4
3
 
DO'S AND DON'TS  
DO:  
DON'T:  
DON’T expect your blender to replace all of your kitchen  
appliances. It will not: mash potatoes, whip egg whites or  
substitutes for dairy toppings, grind raw meat, knead or mix stiff  
dough, or extract juices from fruits and vegetables.  
Use only the line voltage and frequency as specified on the bottom  
of the blender.  
Always operate blender on a clean, dry surface to prevent air from  
carrying foreign material or water into the motor.  
DON’T process mixtures too long. Remember, the blender  
performs its tasks in seconds, not minutes. It is better to stop and  
check the consistency after a few seconds than to overblend and  
have a mushy or too finely ground product.  
DON’T overload the motor with extra-heavy or extra-large loads.  
If the motor stalls, turn off immediately, unplug cord from outlet  
and remove a portion of the load before beginning again.  
DON’T attempt to remove blender container from motor base or  
replace it until the motor has coasted to a complete stop. Blender  
parts can be damaged.  
DON’T remove container cover while processing, as food  
spillage can occur. Use feeder cap opening to add ingredients.  
DON’T place or store processing assembly on motor base  
without first correctly assembling to blender container. Severe  
injury can result if blender is accidentally turned on.  
DON’T use any utensil, including spatulas, in the container while  
the motor is running. They can catch in the moving blades, break  
the container and cause severe injury.  
Put liquid portions of recipes into blender container first unless the  
instructions in recipes specify otherwise.  
Cut all firm fruits and vegetables, cooked meats, fish and seafoods  
into pieces no larger, than 3/4" (1.8 cm) to 1" (2.5 cm). Cut all  
kinds of cheeses into pieces no larger than 3/4" (1.8 cm).  
Use rubber spatula to push ingredients to be chopped into liquid  
portion of recipe ONLY when motor is OFF.  
Place cover firmly on blender container before starting, and rest  
hand on the container cover when starting and running motor.  
Remove heavy dips and spreads, nut butters, mayonnaise and  
products of similar consistency by removing the processing  
assembly and pushing the mixture out through the bottom opening  
into serving dishes or storage container.  
Pour mixture if liquid or semi-liquid consistency, such as muffin  
and cake batter,from blender container.  
Allow cooked vegetables and broth to cool before pouring into  
blender container for processing.  
DON’T use ANY container not recommended by manufacturer  
for processing foods.  
Switch to the next higher speed if the motor seems to labor when  
processing at one of the lower speeds to prevent overloading of the  
motor.  
Other containers may break or loosen during processing and cause  
severe injury.  
5
6
 
CARE AND CLEANING STEPS  
CARE AND CLEANING OF YOUR BLENDER  
1. Push the OFF button and unplug the appliance.  
2. Grasp container handle and lift container from the  
blender motor base. Rinse with water to remove any  
large food particles that may have accumulated in the  
container.  
3. Reposition the container into the blender motor base.  
4. Add 1 1/2 cups warm, soapy water to the container and  
cover with the lid assembly.  
5. Push one of the low settings for a few seconds.  
6. Touch the OFF position and unplug the appliance.  
7. Grasp container handle and lift container off of the  
blender motor base. Remove lid and assembly and rinse  
container with water. Repeat steps 1-7 as necessary.  
8. Unscrew collar from container and remove cutting  
assembly.  
Blender container parts are corrosion resistant, sanitary and easily  
cleaned. Before first use and after every use, separate container  
parts and clean thoroughly in warm, soapy water, then rinse and  
dry well. DO NOT WASH ANY PARTS IN AN AUTOMATIC  
DISHWASHER.  
Periodically check all parts before re-assembly. If the processing  
blades are stuck or difficult to turn, DO NOT USE BLENDER.  
Check by carefully turning the blades in a counter clockwise  
direction (opposite edges are sharp). Blades should turn freely. If  
the glass container is chipped or cracked DO NOT USE  
BLENDER. Further use could result in the container breaking  
during use. Use only Bravetti recommended replacement parts  
available at an authorized service facility or the factory. USE OF  
DAMAGED OR NON-RECOMMENDED PARTS COULD  
RESULT IN SEVERE PERSONAL INJURY AND/OR  
DAMAGE TO THE BLENDER.  
CAUTION: BLADES ARE SHARP. HANDLE  
CAREFULLY.  
NEVER IMMERSE THE MOTOR BASE IN WATER. The  
housing can be cleaned with a damp cloth (unplug first). The motor  
is permanently lubricated and does not require any additional  
lubrication. ANY SERVICING SHOULD BE PERFORMED  
BY AN AUTHORIZED SERVICE FACILITY.  
CAUTION: NEVER PLACE BLENDER MOTOR  
BASE OF APPLIANCE IN WATER OR  
OTHER LIQUIDS.  
1. Immediately after each use, disassemble lid and cutting  
assembly. Carefully wash all parts in warm soapy water.  
Rinse and dry thoroughly. Do not wash parts in  
dishwasher.  
2. Do not use a harsh abrasive on any part of the blender.  
3. Clean the exterior of blender motor base with a soft  
damp cloth and dry.  
4. Reassemble cutting assembly onto container. Place onto  
blender motor base with lid assembly. Spin dry on  
HIGH for 10 seconds.  
Any servicing requiring disassembly other than the above cleaning  
must be performed by an authorized service center. Failure to  
follow this instruction may result in a fire, electric shock or injury  
to persons.  
7
8
 
YOUR NOTES AND RECIPES  
BLENDING GUIDE  
Your blender features a variable speed control. While you may select  
any speed, the following list will help you determine where to set the  
control for various items.  
TO PROCESS FOOD  
1. Assemble container.  
2. Put ingredients into blender container, cover firmly, and place  
container into ring on motor base.  
SPEED SETTINGS  
SPEED  
ICE CRUSH  
PUREE  
FOODS  
MIXING PROCEDURES  
Slush, Margaritas  
Crush ice cubes and add liquid  
Baby Foods  
Whipping Cream  
Cream Soups  
Cook Food, cool, add to blender  
Add sugar gradually to desired taste  
Add liquid, then soups, mix  
WHIP  
MIX  
GRATE  
BLEND  
LIQUIFY  
Cheese  
Cut in cubes and grate  
Add fresh fruit mixture  
Yogurt and Fresh Fruit  
Fresh Fruits  
Liquefy fruits, add ice cream  
10  
9
 
YOUR NOTES AND RECIPES  
ONE (1) YEAR LIMITED WARRANTY  
EURO-PRO OPERATING LLC warrants this product to be free from defects in material  
and workmanship for a period of one (1) year from the date of purchase when utilized for  
normal household use.  
If your appliance fails to operate properly while in use under normal household  
conditions within the warranty period, return the complete appliance and accessories,  
freight prepaid. For Customer Service support, call 1 (800) 798-7398 or visit our website  
www.euro-pro.com. If the appliance is found by EURO-PRO to be defective in material  
or workmanship, EURO-PRO will repair or replace it free of charge. Proof of purchase  
date and $9.95 to cover the cost of return shipping and handling must be included.*  
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or  
replacement of the unit at our option. This warranty does not cover normal wear of parts  
and does not apply to any unit that has been tampered with or used for commercial  
purposes. This limited warranty does not cover damage caused by misuse, abuse,  
negligent handling or damage due to faulty packaging or mishandling in transit.  
This warranty is extended to the original purchaser of the unit and excludes all other  
legal and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if  
any, is limited to the specific obligations expressly assumed by it under the terms of the  
limited warranty. In no event is EURO-PRO Operating LLC liable for incidental or  
consequential damages of any nature whatsoever. Some states do not permit the  
exclusion or limitation of incidental or consequential damages, so the above may not  
apply to you.  
This warranty gives you specific legal rights, and you may also have other rights which  
vary from state to state.  
*Important: Carefully pack item to avoid damage in shipping. Be sure to include  
proof of purchase date and to attach tag to item before packing with your name,  
complete address and phone number with a note giving purchase information,  
model number and what you believe is the problem with item. We recommend you  
insure the package (as damage in shipping is not covered by your warranty). Mark  
the outside of your package “ATTENTION CUSTOMER SERVICE”.  
yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy  
OWNERSHIP REGISTRATION CARD  
FOR CANADIAN CONSUMERS ONLY  
Please fill out and mail the product registration card within ten (10) days of purchase in  
order to validate the foregoing Limited Warranty. The registration will enable us to  
contact you in the unlikely event of a product safety notification. By returning this card  
you acknowledge to have read and understood the instructions for use, and warnings set  
forth in the accompanying instructions.  
RETURN TO EURO-PRO Operating LLC, 4400 Bois Franc, St-Laurent, QC, H4S 1A7  
BB301  
______________________________________________________________________  
Appliance model  
______________________________________________________________________  
Date purchased  
Name of store  
______________________________________________________________________  
Owner’s name  
______________________________________________________________________  
11  
Address  
City  
Province  
Postal Code  
 

Bissell Vacuum Cleaner 3601 User Manual
Blackberry Cell Phone 8707g User Manual
Black Decker Coffeemaker CM1010B User Manual
Black Decker Coffeemaker DCM675BFC User Manual
Black Decker Toaster TRO965 User Manual
Blue Rhino Outdoor Fireplace WAD840SP User Manual
Bosch Power Tools Clock Radio PB360S User Manual
Butler Audio Stereo Amplifier TDB 3150 User Manual
Canon Fax Machine FAX L380 User Manual
Chief Manufacturing Network Card CMA351 User Manual